Design requirements
Articles submitted for publication must contain the results of scientific research in the field of economics of the agro-industrial complex, mechanization and technical service, and agronomy. The articles are selected based on the criteria of relevance and novelty of the scientific problems under consideration.
It is supposed to check the material provided by the authors in the "Anti-Plagiarism" system. The recommended length of the article, including appendices, should be at least 10 and no more than 14 pages. Articles should be written on A4 sheets, font – Times New Roman, size – 14 pt, line spacing – 1.0. Margins (normal) top and bottom – 2 cm, left – 3 cm, right – 1.5 cm, paragraph (indentation) – 0.5 cm (do not specify spaces), format – bookstore.
If an article has been or will be sent to another publication, it is necessary to inform the editorial board about this.
Article design
1. The UDC of the article is printed in the upper left corner without a paragraph (check the correctness of the selected UDC on the website of the All–Russian Institute of Scientific and Technical Information - VINiTI).
2. Below, in the center of the line, the title of the article (the title of the article should reflect the main idea of the research performed, be as brief as possible) in bold capital letters.
3. Then, in bold lowercase letters, the initials and surname of the author(s). One line is skipped.
4. Next, the author's affiliation is indicated, indicating the city and country.
5. After that, through a space, the abstract of the article (recommended length – 200-250 words) reflects the subject of the article, value, novelty, main provisions and conclusions of research using digital data. It is forbidden to divide the abstract into paragraphs, the use of introductory words and phrases. The abstract can be published independently and, therefore, should be understandable without referring to the text of the article. According to the abstract of the publication, the reader should be able to determine whether it is worth referring to the full text of the article for more detailed information of interest to him.
6. From the new paragraph – keywords (no more than 9 words).
On the left, "Keywords:" is printed in lowercase letters (without quotes) and keywords or phrases are separated by commas. One line is skipped.
7. When writing a scientific article, it is necessary to adhere to the following structure of presentation: "Introduction", "Conditions, materials and methods", "Results and discussion", "Conclusions".
8. If your article was prepared during the grant process and it is necessary to specify this source, add the section "Information about the source of funding" after the conclusions. For example, Information about the source of financing: The work was carried out according to the state R&D assignment. No. 0477-2019-0005 with the financial support of the Ministry of Education and Science of the Russian Federation.
In the "Introduction" section, a statement of the problem is proposed, the purpose of the work should be formulated and justified and, if necessary, its connection with important scientific and practical areas should be considered, and a theoretical justification for the research is given. There should be links to recent publications in the field, including foreign authors.
The section "Conditions, materials and methods" reveals the features of this study, provides conditions, materials and research methods. The place of research is being specified to the region (edge). The time, place, methodology, and conditions of the experiments should be reflected.
The main section of the article "Results and discussion" is devoted to the presentation, analysis and discussion of the results. The results obtained should be highlighted in terms of their scientific novelty and compared with the relevant known data.
In conclusion, conclusions and recommendations are presented.
Subheadings and headings are typed in bold with capital letters. The numbering of references to the bibliographic list in the text is arranged in the order in which the sources are mentioned. References to literature in the text are given in square brackets, for example: [1].
9. After the main text of the article, one line is skipped and the title "Literature" is printed in the center (without quotation marks). A numbered list of sources is placed one line apart in the order of references in the text. The list of references (at least ten sources, including at least three foreign ones) is drawn up in accordance with GOST R 7.0.5–2008 and the requirements of the journal, is carefully checked by the authors and is given at the end of the article. The references in the list are numbered according to the order in which they are mentioned in the text. Only one source of information should be indicated in one item of the list. Abuse of self-citation is not allowed. The share of references to the authors' own publications should not exceed 25% of the list of references. Citations of works by any one author who is not a member of the manuscript's team of authors should also not exceed 25%. It is recommended to refer to no more than 2 publications of each of the authors. The share of references to sources older than 10 years should not exceed 25% of the list of references, the share of references to publications in journals from the core of the RSCI over the past 8 years should be at least 50% of the list of references. References to textbooks, study guides, and dissertation abstracts are not accepted. Also, links to conference materials older than 2 years are not accepted. The number of sources in the "serial" links should not exceed three.
Examples of reference formatting
All sources must have a link in the text of the article.
10. Information about the authors: Full name - academic degree, academic title, position, specify the department or department, full name of the organization (with the exact address), e-mail, ORCID of the author.
11. Information about conflicts of interest. The article should indicate a real or potential conflict of interest. If there is no conflict of interest, then it should be written that "the author declares that there is no conflict of interest."
12. Contribution of the authors. It is necessary to clarify the contribution of each author to the preparation and writing of the article using CREDIT, CRediT author statement (in Russian).
13. Next, the information is printed in English: the title of the article, the abstract, the keywords.
14. A bibliographic list is provided in Latin (by transliteration) under the References heading. (Translate only the titles of the articles, the rest is in Latin transliteration)
15. "Authors:" – information in English.
Illustrations to the article (if available) in JPEG, PNG, or TIF format should be clearly executed, of good quality, and clearly illustrate the text. The text of the article must contain links to the presented drawings. The figures are numbered in the order of the references in the text. The numbering heading is typed in the center alignment. The thematic heading is in the same line, immediately after the numbering one (for example: Fig. 1 –. The reference to the drawing in the main text is placed in parentheses: (Fig. 1). If there is only one drawing in the text, it is not numbered.
Tables are presented in the WORD editor. The tables are numbered in the order of the references in the text. The text of the article must contain links to all the tables presented. The numbering heading is typed in centered alignment (for example: Table 1. ...). The reference to the table in the main text is placed in parentheses, for example: (Table. 1), if there is only one table in the text, it is not numbered.
Simple formulas that do not contain special characters (missing on the keyboard) must be typed using keyboard characters without using special editors. Formulas containing special characters (missing from the keyboard), as well as complex and multiline formulas must be typed in their entirety in the formula editor Microsoft Equation 2.0, 3.0 or MathType equation. It is not allowed to set parts of a formula in symbols, and parts are not allowed in the formula editor. It is not recommended to insert formulas in the text in the form of figures. The reference to formulas in the main text is placed in parentheses, for example: (1). The text must contain references to all the formulas presented. If formulas are numbered in the text of the article, then this numbering should be performed by manually typing numbers. Automatic numbering is not allowed.
The authors submit to the editorial office (at the same time):
– an electronic version of the article (by e-mail: vestnik@kazgau.com).
The file with the article should be named by the surname of the first author (Ivanov I.I. – Definition of force...);
– information about the authors (in electronic form): Full name (in full) - academic degree, academic title, position, specify the department or department, contact address, phone, e-mail and full name of the organization, ORCID of the author; the same information in English.
– accompanying documents for the article:
a) a license agreement granting the rights to use a scientific article signed by all the authors;
c) a cover letter signed by all the authors.
Articles received and accepted for publication are not returned.
Subject to the fulfillment of the formal requirements for materials for publication, the manuscript of the article submitted by the author is reviewed according to the established procedure for reviewing manuscripts submitted to the editorial office of the journal. The decision on the expediency of publication after review is made by the editor–in-chief (deputy editors), and if necessary, by the editorial board as a whole.
The editorial board reserves the right not to register articles that do not meet these requirements, as well as the right to reproduce materials (publication, replication). no limited edition. The manuscripts of the articles are subject to editorial processing. The editors reserve the right to make editorial changes that do not affect the content of the article. All articles are reviewed by the institute of peer review, according to the results of which the editorial board makes a final decision on the expediency of publication. The authors are legally and otherwise responsible for the content of the articles. Articles sent to the editorial office without meeting the basic requirements for published articles are not considered. In case of rejection of the article, the editorial board sends the author a reasoned refusal.
Articles should be sent to the following email address: vestnik@kazgau.com
